-
Salt Dough Starfish Ornament
That’s right. The title says it all. I’m veering away from traditional ball ornaments this year (don’t worry, we do have several) and trying something new to remind us of the years we lived by the ocean. So, we made salt dough starfish for our Christmas tree and they are looking quite lovely, if I do say so myself.
Warning: this post is pic heavy. If you don’t like photos, then do not proceed. Just kidding. Who doesn’t like photos?
Overall, we enjoy our main tree being pretty neutrally decorated and have chosen a lot of natural-esque kinds ornaments such as white feathers, spray painted pine cones, silver snow flakes and metal rain drops. (Those occur in nature, right?) It seemed only natural to add starfish to this grouping. And we made them from items we already had in our home. Major bonus!
I started out with 2 cups of flour, 1 cup of salt, and 1 cup of water and threw that into a bowl to make my salt dough.
Next, I mixed it all up.
Grabbing a chunk of the dough, I rolled it into a ball and squished it down on a floured surface.
Then, I used a White Finger Starfish that I already owned to measure where the legs would go and marked it with the pointy end of a skewer. (Skewers are the perfect tool for this project, but a toothpick, a pencil, or a fork could totally achieve the same results.) If you don’t have a starfish to use as a template, you could totally eyeball it or download a starfish template from the inter-webs. Where there is a will, there is a way…
Using the skewer again, I cut out the triangular pieces between each leg piece.
The legs were then smoothed out and received a little extra piece at the end to make them longer.
Don’t worry. This next photo is not some weird starfish mating ritual. I was just checking the dimensions to see if they were similar. Not perfect, but good enough! Sidenote: No echinoderms were harmed in the making of these ornaments.
After the salt dough starfish was whole, I again used the pointy end of the skewer to poke tiny holes all over the legs and body…
And the blunt end to make a hole at the end of one leg for some string to go through.
When all of the starfish are finished, bake them in the oven at 200 degrees for a couple of hours until dry. Or leave them out on the counter to dry overnight while you get your sleep on.
I noticed, once mine were dry, that they looked a bit more like the color of first morning urine than the original white I was trying to emulate.
So, I grabbed some white acrylic paint and water and brushed them on the fronts and backs of each sea star. Looks better, no?
Finally, the paint dried and the starfish were ready to hang on the tree.
I know it isn’t perfect, but doesn’t it look pretty realistic? You can’t even tell that it is salt dough if you are standing more than a foot away from the tree. And the fact that it cost me a whole lotta nothing was the best part. That is always the best part.
-
Whitewashed Brick Fireplace
Smack dab in the middle of the largest wall of our great room is a fireplace. The brick was a reddish-orangey-brown color. (That’s right. It’s a real color.) Our house is mostly decorated in black, white and gray so this color was just not meshing very well. I love the warmth the brick provided and I thought whitewashing the whole area would still give us that, but mute the color a bit. Check out our Whitewashed Brick Fireplace!
This post contains affiliate links for convenience. Click here to view my full disclosure. I was a bit hesitant to make this commitment because once you paint brick, it’s hard to reverse the process.
But one night when my husband was out of town and the kids were tucked cozily into their beds, I finally got up the courage to do it. You know what they say, “When the cat is away, the mouse will paint.” Or something like that.
First, I prepped the area by removing all things I didn’t want to get paint on and covered the floor with a drop cloth. We have cathedral ceilings so I also pulled out our ladder to make sure I could reach the top.
Next, I combined my concoction of 1 part white paint to 1 part water in a five gallon bucket. Once mixed up, I transferred some to a handheld paint pail and up the ladder I went.
Starting at the top and working my way down, I brushed the paint onto the bricks and the grout. (This brush is awesome!) I worked in small sections. After I let the paint soak in a bit, I wiped off the excess with an old rag and moved onto the next section. I repeated these steps until the fireplace was complete. This was a very messy process, but maybe my clumsiness is partly to blame. I did drop the paint pail once, as you can see in this picture.
What do you think? I absolutely love the way the texture of the brick shows through the paint. One day, I am hoping to stain our mantel an ebony color to match the decor in the rest of the room. More on that later.
-
Wrapping Paper Bow
I would love to be one of those people who has all of their holiday presents purchased and wrapped by the beginning of December. But, alas, I am not. I’m typically the person at the other end of the spectrum, who is running around like a mad woman on Christmas Eve trying to tie up all of the loose ends. However, this year has been a little bit different. Most of the gifts we are giving are at our house or on their way. (Thanks online shopping!) We’ve even had one Christmas celebration already this year, so those presents have been given to their recipients.
Since I had all of these presents just lying around, waiting for my kids to “accidentally” stumble upon, I decided to start my wrapping a bit early this year. Lucky me that I didn’t inherit the same present wrapping skills as Emily. (Just kidding. You can see her beautifully wrapped present ideas here.)
One thing that I have found that saves me some moolah and makes my gifts look good is to make my own curly wrapping paper bows. They are super easy and only take a few minutes to make. Saved time and money? That’s my jam. It is the theme song to my busy and frugal existence.
Anyway, let me show you how you can whip up one (or 100) of these puppies for your own gifts. Follow the steps below.
1. Gather supplies. All you need is a 9″ x 9″ cut piece of wrapping paper, a pair of scissors, and some Scotch tape. Simple, right?
2. Fold the wrapping paper piece in half and crease.
3. Using scissors, cut 1/2″ strips into the open side of the paper all the way along the edge, leaving about 1″ uncut next to the fold.
4. Next, use one side of the scissors to curl the wrapping paper like you would with regular curling ribbon. Don’t pinch too tight or the paper will rip.
5. Hold the paper with the crease towards you and fold it in half to the left (or right) twice.
6. Add a piece of tape to close off the open end, opposite of the new fold.
7. Cut a half inch up both sides, through both the fold and the tape.
8. After that, fold the bottom halves up in opposite directions. This will be the base where you will attach the ribbon to the package.
9. Fluff those little, curly tendrils a bit and place the bow on your package. Voila! All done.
This seems to work with pretty much any wrapping paper that I have found and also works with book pages and sheet music. I have yet to try newspaper or anything that thin, but if you give it a go, let us know!
-
Wire Mesh Pin Board
Pinterest is a big deal. If you haven’t explored the many different pins and quickly become addicted to looking at pretty pictures and organizing them into neat little boards, then you are definitely missing out. However, when you are a sweet little 9 year old, like my daughter, Pinterest is something for the ol’ folks, because honestly, you are just too innocent to have to experience some of the randomness that pops up on the internet. So, to give our daughter a way to collect and display her own creative and pretty photos, my husband and I created a pin board out of wire mesh (aka hardware cloth, aka square chicken wire.)
After a trip to the local hardware store to gather supplies, we quickly started putting everything together. We bought four 36″ x 2″ x 1/2″ pieces of craft board for the frame and hubby used a hand saw and miter saw box to cut the boards on a 45° angle, so the corners would meet up nicely.
Next, he cut some hardware cloth a little smaller than the outer dimensions of our frame.
Then, it was my turn. Since we couldn’t find any galvanized wire mesh at the store with reasonable dimensions (hello, we didn’t need 50 feet,) we went with the green coated stuff. I placed the cut piece on top of a drop cloth and coated it with a few layers of white spray paint to match the frame, which I also painted white.
Once everything was dry, it was time to piece it all together. We found some corner braces that reminded me of something you might see on campaign furniture, so I opted to put them on the front of the frame and give it that same type of look.
Lastly, using a staple gun, I attached the painted wire mesh to the back of the frame, stretching and pulling it, as best as I could, to get it to lay flat. (It still is a bit bumpy/wavy, but works perfectly for our needs.)
Here it is up on the wall, doing its duty. Not doody. Because that would be gross.
I grabbed a handful of paper clips to attach a few pretties to the board. I’ve seen clothes pins used in a similar manner, but probably any sort of small clips would work.
Buying a regular, old bulletin board would have probably been easier, but isn’t this one so much cooler?